printable version

Removal and installation of rear lights, changing bulbs

Details of installation of rear light

E3 - Right taillight	E4 - Left taillight

The design of the rear light

1 - Stoplight 2 - Fire backing	3 - Direction indicator 4 - fog light (left light) / rear position / parking light (right lamp)

PERFORMANCE ORDER

Details of the installation of rear lamp assemblies are shown in the illustrations, which include all the links in the text. Give fixing nuts (5), thread the pin (6) in the support (7) and pull back, release the appropriate lamp assembly (E3 and E4) from its landing nest in the body parts. Disconnect the wiring connector (8) and remove the lamp assembly (E3 / E4). Installation is in the reverse order. Finally, check if the functioning of the running / signal lights.

Replacing bulbs

Replacement of lamps of a back lantern

PERFORMANCE ORDER

Having hooked a screw-driver to unlock and disunite a contact socket (2). Squeeze the clips (3) and remove the bulb holder. Click on the bulb, turn it to the left and out of the lamp holder. Installation is in the reverse order.