 printable version
Removing and installing headlight units, replacement of lamps
Details of lens units
| - Details of lens units are shown in the illustration, which includes all the links in the text.
- Open the hood.
- Releasing the latch (arrow A) under the lamp holders, remove the cover (1).
- Remove the screws (2) and take the nuts (3).
- With the punch (4) release the support of the receiving opening and remove the lens unit (E1 or E2) by pulling it forward.
- Disconnect the wiring connector (X24).
- Installation is in the reverse order - track reliability snaps into place and evenly spaced with respect to the bumper cover.
- Finally, check the serviceability of functioning and proper adjustment of headlights.
|
|
Replacing bulbs Details of the installation of lamps lights
| - Corresponding illustrative material is presented in the figure, which includes all the links in the text.
- Open the hood and fix it in an upright position.
- Depressing the latch lever (3) in the direction of the arrow, release and remove the cover (1).
- Remove the cover (2).
- Disconnect the electrical connectors (4) lamps.
- Releasing the corresponding clip (5), remove the lamp needs to be replaced (E1e1, E1E2 or E1e4), - try not to touch the bulb with bare fingers (the right thing will do the work in a clean cotton gloves).
- Installation is in the reverse order - track reliability of fixing the lamp holder.
|
|
|
