 printable version
Removal, installation and lamp replacement fog light
Details of the installation and its fog lamps (version 1) Removing fog (version 2) Replacing the lamp fog lamp (version 2) Corresponding illustrative material is presented in the illustrations, which includes all the links in the text. Refitting | - Details of installation of fog lamps are shown in the illustration, which includes all the links in the text.
- Remove the bumper cover (1), - try not to damage the locking tabs.
- Remove the bolt (2).
- Release assembly fog from his landing slot in the front bumper.
- Installation is in the reverse order.
|
|
Replacing the lamp | - Remove the bumper cover (1), - try not to damage the locking tabs
- By turning counterclockwise, remove the cover fog lamp (3).
- Having hooked a good wedge, release of the reflector housing (7).
- Disconnect the connector (5) wiring and remove the bulb (4) from the rear side of the reflector (7), - try not to touch the bulb with bare fingers (the right thing will do the work in a clean cotton gloves).
- Installation is in the reverse order - track reliability snaps into place all the clamps.
|
|
|
