 printable version
Replacement lamps are lamps
The design of the front cabin lamp
| - The design of the front cabin lamp is shown in the illustration, which includes all the links in the text.
- Remove the roof console (1).
- Remove the lamp needs to be replaced (2).
- Liberate from clamps, remove from the console panel (1) Lamp holders (3).
- Remove the reflector (6) Switch (4).
- Remove the screws (5) and lift gently release the console from the panel (1) Reflector (6) Lighting.
- Installation is in the reverse order. Finally, check the serviceability of functioning of lamps.
|
|
Rear light The design of the rear cabin lamp
| - The design of the rear cabin lamp shown in the illustration, which includes all the links in the text.
- Having hooked, Plafonds flip cover (1) by lowering it all the way to the backstop.
- At a corresponding complete disunite pin wiring indicator display system Parktronic.
- Release assembly salon lamp (E15 / 3) from the ceiling trim - Pull the rear edge of the set down and post it forward at the same time.
- Disconnect the connector (2), lamp wiring.
- If necessary, remove the faulty lamp.
- Installation is in the reverse order. Make sure of serviceability of functioning of the luminaire.
|
|
|
