 printable version
Removing and installing rear end cover, replace the crankshaft rear oil seal
Details of installation of the rear end cap / engine crankshaft oil seal Series 612
| - Details of installation of the rear end cap / crankshaft rear oil seal on the 612 series engines are shown in the illustration, which includes all the links in the text.
- Remove flywheel / drive plate (1) (see. Section Removal and installation of a flywheel / drive disc).
- Turn out fixing bolts and remove the end cap (2) complete with crankshaft rear oil seal - to hook the cover in places indicated by the arrows, try not to damage the seal of the oil pan.
- Drain the engine oil.
- Loosen the screws of the drain pan and the last remnants of oil.
- Carefully smooth out interfaced surfaces.
- Replace the cover with her pressed into the gland.
 | If the gasket (3) is damaged, the cover must be replaced. |
- Install a back sealing ring of the crankshaft (5) (clutch assembly (4)).
- Install the flywheel / drive plate.
- Tighten the pan.
- Fill the engine with fresh oil.
- Start the engine and check for any signs of leaks.
|
|
M628 Details of installation of the rear end cap / engine crankshaft oil seal Series 628
| - Details of installation of the rear end cap / crankshaft rear oil seal on the 628 series engines are shown in the illustration, which includes all the links in the text.
- Remove the transmission (see chap. Automatically processed transmission).
- With the help of a special device (7), lock the ring gear of the drive disk.
- Remove the screws (6) and remove the drive disc (4) (see. Section Removal and installation of a flywheel / drive disc).
- Drain the engine oil (see chap. Power supply system and exhaust).
- Remove the bolts (2) and remove the end cap (1), gently lift it using a flathead screwdriver in the area of installation guides.
- Remove the old seal (3)
- Carefully smooth out interfaced surfaces and planting on the sealant, replace the cover.
- Install a new oil seal (3).
- Deytsvuya in the reverse order of disassembly, replace the components acting in film.
- Start the engine and check for any signs of leaks.
|
|
|
