 printable version
Removal, installation and adjustment of the top hatch vetrootboynika
Installation Details vetrootboynika top hatch
| - Open the hatch.
- Remove the fastening screws (1) and remove the chrome cross member (2).
- Remove the clamps (5) and support units (9) and pull them back, releasing vetrootboynika edge (6).
- Release bump (6) of the central support (7) by gently prying with a screwdriver on the left and on the right, remove it from the spindle assembly with supports (8).
- Installation is in the reverse order.
- Make sure of serviceability of functioning vetrootboynika - if when reverting hits the hatch cover, adjust the fit with the control element Vita (arrow).
- If the operation vetrootboynika (6) is accompanied by a rattling sound should release it from the central support (7) is pressed while in the vicinity of the lateral supports (8), slightly bend and snap into place.
- Finally, make sure of serviceability of functioning vetrootboynika during test drives at a speed of at least 100 km / h. If necessary, repeat the adjustment procedure.
|
|
|
