REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz G-Class (W463, 1999 issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mercedes-Benz
	G-class
		Introduction
		Controls and operation receptions
		Current care and maintenance
		Engine
		System of cooling, heating, ventilation and air conditioning
		The power supply system and exhaust
		Systems of an electric motor
		Automatic Transmission
		Transmission Line
		Brakes and auxiliary systems
		Suspension and steering
		Body
			Specifications
			Outdoor equipment and body parts
				Removing setting wiper arms
				Removing the drive front wipers
				Removing and installing bonnet
				Removing and installing bonnet
				Removal and installation drive a cable release latch bonnet
				Removing and installing the front grille
				Removal and installation of covers of block headlights
				Removal and installation of anther engine compartment complete AMG
				Removing and installing side steps
				Removing and installing bumpers
				Removing and installing door mirrors
				Removing and installing reservoir Windshield washer fluid
				Removal and installation of the spare wheel
				Removing and installing lockers protect wheel arches
				Removing and installing panels exterior finish stands A
				Removing and installing the front wings
				Removal, installation and adjustment of doors
				Removal and installation of a gas-filled tailgate lock (Versatile model)
				Removing and installing exterior door handles
				Removing and installing interior door handles
				Removing and installing door locks
				Removal and installation of latches and locking wedges tailboard
				Removing and installing interior door trim assemblies
				Removing and installing electric window regulator door
				Removing and installing door window frame assemblies
				Removal and installation of the glazing body
				Removing and installing trim panels cover the top hatch
				Removal and installation of a cover of the top hatch
				Removal and installation of a cable drive of the top hatch
				Removal and installation of the top hatch frame
				Removal and installation of the sealing element and the top hatch of its attachments
				Removal and installation of a drainage trough top hatch
				Removal, installation and adjustment of the top hatch vetrootboynika
			Salon Equipment
		Onboard electric
		Wiring

printable version

Removing and installing door locks

The front doors

Details of installation of the lock of the front door (1 of 4)

1 - Cover

Details of installation of the lock of the front door (2 of 4)


2 - Drive Rod 3 - Link internal handle	4 - draft of the uniform lock

Details of installation of the lock of the front door (3 of 4)


5 - Bolts	M14 / 6 - Activator uniform lock (left door)

Details of installation of the lock of the front door (4 of 4)


7 - Mounting screws	8 - Castle assembly

PERFORMANCE ORDER

Remove the interior trim and door insulation film (see. Section Removal and installation of interior trim door assembly), - damage to the film to be replaced.
Remove the window frame (see. Section Removal and installation of window frames door assemblies).
Remove the cover (1) of the castle assembly.
Release the clamp securing the lock (8), thrust (3) of the internal handle and disconnect draft - if necessary, prepare a removable retainer.
Disconnect from the Castle (8) Rod (2 and 4) - damaged latches must also be replaced.
Remove the mounting bolts (5) and remove the uniform lock activator (M14 / 6).
Remove the outside door handle (see. Section Removal and installation of exterior door handles).
Remove the screws (7) and remove a locking assembly (8).
Installation is in the reverse order.

Rear doors

Details of installation of the lock of a back door (1 of 4)


1 - Cover

Details of installation of the lock of a back door (2 of 4)


2 - Drive Rod 3 - Link internal handle	4 - draft of the uniform lock

Details of installation of the lock of a back door (3 of 4)


5 - Bolts M14 / 8 - Activator uniform lock (left door)	M14 / 9 - Activator uniform lock (right door)

Details of installation of the lock of a back door (4 of 4)


7 - Mounting screws	8 - Castle assembly

The procedure is similar to the procedure described above for the front door.
In a second embodiment of the models do not forget to check the fuse (5), - in case of need make replacement.

Tailgate

Details of installation of the tailgate (1 of 3)

1 - Screws

Details of installation of the tailgate (2 of 3)


2 - Castle assembly

Details of installation of the tailgate (3 of 3)


2 - Castle assembly 3 - Link uniform lock 4 - Lock	5 - Fuse 6 - Link internal handle

PERFORMANCE ORDER

Remove the trim (see. Section Removal and installation of an internal upholstery of door assemblies).
Remove the outside handle (see. Section Removal and installation of exterior door handles).
Remove the inside handle (see. Section Removal and installation of internal door handles).
Remove the lock activator (see chap. Onboard electric equipment).
Remove the fastening screws (1) and remove a locking assembly (2).
Remove the rod (3) an activator of the uniform lock.
Remove the clip (4) and disconnect the tie rod (6) of the internal handle.
Installation is in the reverse order. Do not forget to check the fuse (5), in case of need make replacement.

Flap

Details Position lock flap (1 of 3)

1 - Plastic Tray
2 - the plastic rivets
3 - Dowel pin

Details of installation of the lock flap (2 of 3)


4 - Lock 5 - Traction drive activator 6, 14 - Levers 13 - Thrust actuator latch lock right	15 - Fixing nut M14 / 6 - Activator uniform lock

Details of installation of the lock flap (3 of 3)


7 - Return spring 8 - Thrust actuator latch lock left 9 - latch lock left	10 - Lock traction 11 - Threaded plate 12 - Tighten the screws on the latch

PERFORMANCE ORDER

Open the rear cover and tool box in the tailgate.
Remove the rivets (2 and 3) and remove the plastic liner (1).
Remove the clip (4) actuating rod (5) and remove the latter from the lever (6) / activator (M14 / 7).
Remove the screws (12) and remove the screw plate (11). By pulling in the direction of the arrows, release the latch (9) left the lock of the door. Release the clip (10) and finally remove the clip (9).
Release the latch and lift the rod (13) from the lever (14).
Give fixing nuts (15) and by filing down, remove a locking assembly with a latch assembly (8) and the sealing element.
Installation is in the reverse order - track correctness of landing pads.

« previos page
Removing and installing interior door handles

next page »
Removal and installation of latches and locking wedges tailboard