REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz G-Class (W463, 1999 issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mercedes-Benz
	G-class
		Introduction
		Controls and operation receptions
		Current care and maintenance
		Engine
		System of cooling, heating, ventilation and air conditioning
		The power supply system and exhaust
		Systems of an electric motor
		Automatic Transmission
		Transmission Line
		Brakes and auxiliary systems
		Suspension and steering
		Body
			Specifications
			Outdoor equipment and body parts
				Removing setting wiper arms
				Removing the drive front wipers
				Removing and installing bonnet
				Removing and installing bonnet
				Removal and installation drive a cable release latch bonnet
				Removing and installing the front grille
				Removal and installation of covers of block headlights
				Removal and installation of anther engine compartment complete AMG
				Removing and installing side steps
				Removing and installing bumpers
				Removing and installing door mirrors
				Removing and installing reservoir Windshield washer fluid
				Removal and installation of the spare wheel
				Removing and installing lockers protect wheel arches
				Removing and installing panels exterior finish stands A
				Removing and installing the front wings
				Removal, installation and adjustment of doors
				Removal and installation of a gas-filled tailgate lock (Versatile model)
				Removing and installing exterior door handles
				Removing and installing interior door handles
				Removing and installing door locks
				Removal and installation of latches and locking wedges tailboard
				Removing and installing interior door trim assemblies
				Removing and installing electric window regulator door
				Removing and installing door window frame assemblies
				Removal and installation of the glazing body
				Removing and installing trim panels cover the top hatch
				Removal and installation of a cover of the top hatch
				Removal and installation of a cable drive of the top hatch
				Removal and installation of the top hatch frame
				Removal and installation of the sealing element and the top hatch of its attachments
				Removal and installation of a drainage trough top hatch
				Removal, installation and adjustment of the top hatch vetrootboynika
			Salon Equipment
		Onboard electric
		Wiring

printable version

Removal and installation of the top hatch frame

Details of the installation frame of the upper hatch (1 of 3)


1 - Frame	3 - Guide tube

Details of the installation frame of the upper hatch (2 of 3)


2 - Drain hose	4 - Bolts

Details of the installation of the frame of the top hatch (3 of 3)


6 - Conductors

Withdrawal

PERFORMANCE ORDER

Remove the flap (see. Section Removal and installation of a cover of the top hatch).
Remove the drive cable (see. Section Removal and installation of a cable of a drive of the top hatch).
Remove the ceiling upholstery (see. Some of salon equipment).
Otboltite guide tube (3) from the frame (1) of the hatch.
Disconnect drainage hoses (2) installed in each of the corners of the frame.
Remove the mounting bolts (4) and remove the frame (1).

Setting

PERFORMANCE ORDER

Set the side guides and grooves in hinged brackets (arrows) on the left and right conductors (6).

Conductors should be removed only after installing the hatch.

Fill the frame (1) on the regular place, taking care of tight seal landing clearance.
Replace and tighten the screws (4), and then take care of the correct connection of the drain hose (2) and guide tube (3).
The further installation is made in the reverse order of disassembly of components - be sure to remove the cap after installing the conductors (6).

« previos page
Removal and installation of a cable drive of the top hatch

next page »
Removal and installation of the sealing element and the top hatch of its attachments