add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Elantra (from 2000 to 2004, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Hyundai Elantra
Home
 
Hyundai
Elantra
Gasoline engines 1.6, 1.8 and 2.0 liters
The diesel engine of 2.0 liters
Greasing system
Cooling
Fuel system
The fuel system of petrol engines
The fuel system of diesel engines
Technical data
General information about the injection system ?�Common Rail?�
Features of the injection
Controlling fuel injection
The main fuel injection
Additional fuel injection
Reducing emissions
Common Rail fuel system
EDC Control System
ECU
Management of the maximum amount of air entering the engine
The active shock absorber, reducing fluctuations of the engine speed of the engine
Switching off the engine
Glow plugs
Removal and installation of injectors
Installing the high pressure fuel pump
Meter of air (Air flow sensor - AFS)
The coolant temperature sensor (ECT)
Camshaft position sensor (CMP)
Sensor crankshaft angle
Sprayers
Fuel pressure in the high pressure accumulator (RPS)
The fuel temperature sensor (FTS)
Pressure control valve
Troubleshooting
Control systems and emission control
Ignition system
The system of preliminary heating of the diesel engine
Coupling
Manual transmission
Automatic Transmission
Drive shafts, front and rear axles
Suspension
Steering
Brakes
Body
The air conditioning system
Electrical equipment
Electrical diagrams
 


Hit Counter by Digits


print page printable version

Pressure control valve



The fuel pressure in the accumulator is maintained at the desired level, pressure regulating valve.

Pressure control valve performs the same function as that of the overpressure valve. In case the overpressure valve opening limits the pressure in the accumulator. If the pressure is below that required, the valve is closed and hermetically separates the low-pressure section of the high-pressure section of the injection.

Check valves

Check the resistance of the valve. Resistance: 2,07-2,53 Ohm.

Revalving

If the output voltage of the valve is not correct, replace the valve. Torque: 5 ?� 1 N ??? m.





« previos page
The fuel temperature sensor (FTS)
next page »
Troubleshooting

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.