 printable version
Removal and installation of doors
Details of the installation of the front door (for example, the left door)  | |
| - Details of the installation of the front door shown in the illustration, which includes all the links in the text.
- Disconnect the terminal block (x35 / x35 or 1/2).
- Remove the screw (1) securing the terminator of opening the door to the counter A.
- Remove from pillar bellow.
- Mark the position of the bottom hinge straps on the door frame, then remove the screws (2) of its fastening.
- Ask the assistant to hold the door and remove the bolts (3) securing the upper hinge strap - also pre-position its mark on the door frame.
- With the help of an assistant, remove the door assembly from the vehicle, - try not to damage the paintwork.
- If any of the loops need to be replaced, remove it from the rack A.
- Installation is in the reverse order - track correctness of combination caused during the dismantling of the landing labels and correct mounting rack anther largest marginal gap (see. Specifications) make sure the door is correctly positioned in the Touring Car opening, if necessary, make appropriate adjustment. Make sure of serviceability of operation latch lock.
|
|
Rear doors Details of installation of the rear door (for example, the left door)  | |
| - Details of installation of the back door shown in the illustration, which includes all the links in the text.
- Disconnect the terminal block (x35 / x35 or 3/4).
- Remove the bolt (1) securing the terminator of opening the door to the bar B.
- Remove from the stand in the anthers.
- Mark the position of the lower hinge strap at the front in, then loosen the screws (2) of its fastening.
- Ask the assistant to hold the door and remove the bolts (3) securing the upper hinge strap - also pre-select them, its position at the front.
- With the help of an assistant, remove the door assembly from the vehicle, - try not to damage the paintwork.
- If any of the loops need to be replaced, remove it from the rack A.
- Installation is in the reverse order - track correctness of combination caused during the dismantling of the landing labels and correct mounting rack anther largest marginal gap (see. Specifications) make sure the door is correctly positioned in the Touring Car opening, if necessary, make appropriate adjustment. Make sure of serviceability of operation latch lock.
|
|
Tailgate Details of installation of the tailgate  | |
| - Details of installation of the tailgate shown in the illustration, which includes all the links in the text.
- Remove the trim door assembly (see. Section Removal and installation of panels of an internal upholstery of door assemblies).
- Disconnect the wiring connectors (1) and push them into the cable channel.
- Disconnect the wiring (2) of the motor drive assembly of the rear wiper. Release the harness from the door frame.
- Secure the door in the open position and remove the sliding fence.
- Pre-mark the position of the loop straps, remove the screws (3) attaching them to the door frame.
- With the help of an assistant, remove the door assembly (4).
- Installation is in the reverse order - track correctness of combination caused during the dismantling of the landing labels, largest marginal gap (see. Specifications) make sure the door is correctly positioned in the Touring Car opening, if necessary, make appropriate adjustment. Make sure of serviceability of operation latch lock.
|
|
|
