 printable version
Removing and installing exterior door handles
Details of the installation of the external handle of the front door
| - Details of the installation of the external handle of the front door shown in the illustration, which includes all the links in the text.
- Release the fixing screw (6).
- Remove the guide and remove the lock cylinder (2).
- Pull knob (1) assembly with a base (4) back and release it from the bearing bracket (8).
- Remove the base (5).
- If necessary, remove the interior trim and a sealing film (see. Section Removal and installation of panels of an internal upholstery of door assemblies), and through the service window in the door frame, remove the support arm (8) of the external handle.
- Installation is in the reverse order - track correctness of planting base (5) on the bearing bracket (8). When installing the guide lock cylinder (2) Track correctness of input rotary shaft (3) into engagement with the actuator lock.
|
|
Rear doors Details of installation of the external handle of the rear door
| - Details of installation of the external handle of the back door shown in the illustration, which includes all the links in the text.
- Release retaining screw T25x100 (3).
- Remove the guide (2).
- Pull knob (1) assembly with a base (4) back and release it from the bearing bracket (6).
- Remove the base (5).
- If necessary, remove the interior trim and a sealing film (see. Section Removal and installation of panels of an internal upholstery of door assemblies), and through the service window in the door frame, remove the support arm (6) of the external handle.
- Installation is in the reverse order - track correctness of planting base (5) is not a support bracket (6).
|
|
Tailgate Details of installation of the external handle of the tailgate
| - Details of installation of the external handle of the tailgate shown in the illustration, which includes all the links in the text.
- Remove the trim door assembly (see. Section Removal and installation of panels of an internal upholstery of door assemblies).
- Give the nut (2) from inside the door.
- Disconnect wiring lantern light plate (E19 / 3 and E19 / 4).
- Remove the screws (3) on the outside of the door and remove the handle (1), - try not to damage the paintwork.
- Installation is in the reverse order.
|
|
|
