printable version

Removal and installation of limiters opening side doors

Details of installation and design of the side door opening limiter

1 - Bolt 2 - of the sealing element holder 3 - The sealing element	4 - Support bracket 5 - limiter 6 - Nut

PERFORMANCE ORDER

Corresponding illustrative material is presented in the figure, which includes all the links in the text. Remove the trim corresponding door and separate the front edge of the sealing film (see. Section Removal and installation of panels of an internal upholstery of door assemblies). Remove the screw (1) securing the stop (5) to the corresponding (A or B) the front - try not to damage the paintwork. Hold the stopper (5) Release the nut (6) fixing it to the door assembly. Remove the stopper, freeing him from the service window in the door frame. Release the lock of the rubber seal of the guide trough window and slide it along the bracket delimiter. Installation is in the reverse order - track correctness of landing window seal guide chute, the screw (1) to stop before screwing the front grease glue, if necessary, replace the damaged door sealing film assembly.