 printable version
Removing and installing rear bumper
Details of the installation of the rear bumper on the standard models (not AMG) configuration without external spare wheel holder
| - Details of the installation of the rear bumper on the standard models (not AMG) configuration without external spare wheel holder shown in the illustration, which includes all the links in the text.
- At a corresponding complete disunite the side plate is placed under the right C-pillar at jacking pin antenna cable of the emergency call (E-call).
- Having hooked a good wedge, remove the lid and take the nuts (E) and the screws (C).
- At a corresponding complete release nut gryazeotboynika.
- Is fed back, carefully remove the bumper, - try not to damage the paintwork.
- With proper configuration, remove the right side of the body antenna emergency call (E-call).
- Installation is performed in reverse order, track correctness of landing relatively tailgate bumper and rear combination lamps.
|
|
Models standard without external spare wheel holder Details of the installation of the rear bumper on the standard models (not AMG) configuration equipped with an external spare wheel holder  | |
| - Details of the installation of the rear bumper on the standard models (not AMG) configuration equipped with an external spare wheel holder shown in resistivity. illustration, which includes all the links in the text.
- At a corresponding complete disunite the side plate is placed under the right C-pillar at jacking pin antenna cable of the emergency call (E-call).
- Give nuts (A) and (B) on the underside of the vehicle frame behind the transverse beam.
- Remove the bolts cantilever brackets (D) of the spare wheel.
 | Bolts fastened by nuts (A) can be pushed from the rear side of the transverse beam. |
- Remove the cantilever brackets (D) of the spare wheel (see. Section Removal and installation of the external spare wheel (at a corresponding complete set)).
- 3 Carefully remove the bumper bar - try not to damage the paint and clips.
- At a corresponding complete rear gryazeotboynika give a nut.
- Before the stop retracted spare wheel holder, post back and carefully remove the bumper, - try not to damage the paintwork.
- With proper configuration, remove the right side of the body antenna emergency call (E-call).
- Installation is performed in reverse order, track correctness of landing relatively tailgate bumper and rear combination lamps.
|
|
Models complete AMG Details of the installation of the rear bumper complete AMG models
| - Details of the installation of the rear bumper on the models shown on the AMG equipment interfacing. illustration, which includes all the links in the text.
- At a corresponding complete disunite the side plate is placed under the right C-pillar at jacking pin antenna cable of the emergency call (E-call).
- Remove the screws (A) securing the mounting brackets to the impact absorbers bottom of the crossbar.
- Remove the trim (Velcro) and remove the screws (B) located on the top edge of the bumper.
- Is fed back, carefully remove the bumper, - try not to damage the paint and wiring - at a corresponding complete set remove the rubber seal on the left on the body and disunite pin wiring system Parktronic.
- With proper configuration, remove the right side of the body antenna emergency call (E-call).
- Installation is performed in reverse order, track correctness of landing relatively tailgate bumper and rear combination lamps.
|
|
|
