printable version

Removal and installation of panels of an internal upholstery of door assemblies

Details of the installation of the inner front door trim

1 - cover of the internal handle 2 - Bolt 3 - Upholstery panel 4 - Bowden (drive lock from the inside of the handle) 5 - Drive rod off button lock	6 - Catchers 7 - Mounting wedge 8 - The lantern illumination input 9 - Bolt

Details of the installation of an internal upholstery of a back door

1 - Upholstery panel 2 - The cover of the internal handle 3 - Bolt 4 - Cover 5 - Catches	6 - Bowden (drive lock from the inside of the handle) 7 - Nuts 8 - sealing film 9 - Flashlight illumination input 10 - Bolt

Details of the installation of the interior tailgate trim (except models with VIN A289565, H754620)

1 - Cover stoplight top level 2 - The cover of the internal handle 3 - Catchers 4 - Bracket	5 - The bottom upholstery panel 6 - Catchers 7 - The top upholstery panel

Details of the installation of an internal upholstery of the tailgate (Models with VIN A289565, H754620)

8 - Folding cover 9 - Bolt	10 - rivets 11 - Anchors (replace)

Details of installation of panels of an internal upholstery of door assemblies shown. Branch upholstery panel made by means of an appropriate wedge, broken in the process of dismantling the threaded fasteners and locks all upholstery panel (regardless of condition) must be replaced without fail. Damaged sealing film should also be replaced.