 printable version
Removing and installing front bumper
Details of installation of front bumper standard models (not AMG) equipment
| - Details of installation of front bumper standard models (not AMG) configuration shown in the illustration, which includes all the links in the text.
- At a corresponding complete set remove protection elements of the lower engine compartment.
- Give nuts (1) and remove the screws (1a) on the left and right sides of the inside of the bumper.
- Carefully, trying not to damage the bearing, release clamps and remove the grille front bumper.
- At a corresponding complete set remove the bumper outside air temperature sensor.
- Give nuts (2) and, leaning forward, remove the bumper, - try not to damage the paintwork.
- Installation is in the reverse order.
|
|
Models complete AMG Details of the installation of the front bumper assembly models AMG (including the ML 55 AMG)
| - Details of the installation of the front bumper assembly AMG models shown in the illustration, which includes all the links in the text.
- Release nut (1) on the right and left sides of the inside of the bumper.
- Carefully remove the bumper grille.
- Remove the screws (2) and, leaning forward, carefully remove the bumper, fog lights Disconnect electrical / sensor system and Parktronic washer fluid hoses.
- Installation is in the reverse order.
|
|
|
