Removal and installation of an external mirror

1. Set the outside mirror inside.
2. Disconnect the negative (-) cable of the battery when the ignition is off. You must first remove the air filter box of the passenger compartment.

Before disconnecting the cable, find out the radio security code, if any, address to Section Replacement of the battery.

3. Press the mirror inside. To fix the mirror in this position, insert a piece of wood (1) length of about 10 cm and hold it. (2) - facing the exterior mirror. Models with electric mirrors fold mirror inside.

4. Remove the three bolts (3), remove the mirror from the door and pull the power cord out of the hole.
5. Disconnect the connector.

1. Place a mirror on the door and Dock connector.
2. Secure the mirror three screws on the door and remove the wood block.
3. Connect the negative (-) cable to the battery when the ignition is switched off. Replace the cabin air filter box. Enter the code of the radio and set the time on the clock.
4. Check the operation of the mechanism of setting the mirror and turn signal lamp.