Removing and installing bonnet

1. Open the hood and set it upright.

2. Mark the position of the striker (1) using a felt-tip pen.

3. Remove the bolts (arrows on an illustration) and remove the retainer from the hood.

4. Mark the position of the bonnet (1) using a felt-tip pen.

5. Remove the bolts (arrows on an illustration) and remove the lock (1) from the front panel from the radiator.
6. Disconnect the drive cable from the hood lock and remove the lock.

7. Mark the position of the locking hook (1) on the hood with the help of markers.

8. Remove the bolts (arrows on an illustration) and remove the locking hook (1) from the hood.

1. Secure the locking hook on the hood according to the label point 8 nm.
2. Install the hood latch into the front of the heatsink, connect the cable of a drive with lock and secure the cable on the front panel.
3. Attach the lock according to the label on the front of the radiator at the moment of 8 nm.
4. Secure the latch according to the label on the bonnet point 8 nm.
5. Close the hood, check the work of the castle, as well as the locking hook. If necessary, loosen the screws and slide the hood latch.