 printable version
Removal and installation of the pressure sensor in the fuel line
Details of the installation of the pressure sensor in the fuel distribution line on models 163.113 (612 series engine)
| - Details of the installation of the pressure sensor of the fuel distribution line on models 163.113 (engine series 612) are shown in the illustration, which includes all the links in the text.
- Remove the trim panel of the cylinder head cover.
- Disconnect the wiring and remove the pressure sensor (B4 / 6).
- Installation is in the reverse order. Finally, clean the memory module on-board self-test (see chap. Systems of an electric motor).
|
|
Models 163,128 Details of the installation of the pressure sensor in the fuel distribution line on models 163.128 (628 series engine)
| - Details of the installation of the pressure sensor of the fuel distribution line on models 163.128 (engine series 628) are shown in the illustration, which includes all the links in the text.
- Disconnect the pipe diffuser (see. Section Service Component inlet air path).
- Release of the support bracket (2) and move aside the vacuum line (1).
- Disconnect the wiring and remove the pressure sensor (B4 / 6).
- Installation is in the reverse order. Finally, clean the memory module on-board self-test (see chap. Systems of an electric motor).
|
|
|
