Removal and installation of the jet rear window

1. Open the tailgate and remove the liner, refer to Section Removal and installation of facing the tailgate.

2. Open the cover (1) and remove the nozzles (2) using forceps to the axis of the cleaner.

3. Remove the water hose (1) with the connecting element (2) the jet.

4. Remove the cover (3) wiper motor (arrows in the illustration) and remove the cover with a screwdriver.

1. Insert the connecting element in the jet cover and lock.
2. Secure the housing cover. At the same time, check the seal, if necessary, replace it.
3. Put the hose on the connecting element.
4. Insert the axis of the jet in a cleaner and secure. Put the cap.
5. Refit the tailgate, refer to Section Removal and installation of facing the tailgate.
6. Close the tailgate, check the operation of the jet and adjust it, refer to the appropriate section.