Removal and installation of the triangular plates

1. Disconnect the negative (-) cable of the battery when the ignition is off. You must first remove the air filter box of the passenger compartment.

Before disconnecting the cable, find out the radio security code, if any, address to Section Replacement of the battery.

2. Insert the plastic wedge (1) behind the lining (2) and remove the cover from the frame window.

3. Disconnect the speaker's connector (refer to the illustration).

1. Place the pad at the window frame and push it under the sealing lip.
2. Push the front cover and lock holders, with the hook (1) should enter under facing the window frame.
3. Connect the negative (-) cable to the battery when the ignition is switched off. Replace the cabin air filter box. Enter the code of the radio and set the time on the clock.