Removal and installation of facing the boot lid

1. Open the trunk and remove the warning sign from the holder.
2. Remove the clamps from the lining Expanding on the trunk lid. To do this, pry pin clamp plastic wedge, for example, HAZET 1965-20 and remove it. The pin can be removed otherwise, for example, obvernuv its strong thread, and pulling the thread.

3. Remove the clips (1) of the lining on the wings of the boot lid.

4. Remove the retaining plate (2) and pull back the wing liner.

5. Remove the two screws that secure.

6. Insert a narrow screwdriver or a knife into the gap in the opening for the handle, press up (arrow 3) and separate cover (2) on the lid.
7. Remove the strip (4) with a screwdriver from the tailgate simultaneously slide holder a warning sign to the left (arrow 5) and remove the lid.
8. Remove the trim from the lid and remove it.

1. Place the trim on the trunk lid, insert it between the lining and the wings clipped.
2. Fix the clamps and trim the wings of the lock plate.
3. Attach the warning sign on the trunk lid and slide it to the right so that the strap locks.
4. Secure the trim on the trunk lid and secure it. Put a warning sign in the holder.
5. Close the trunk lid and check its status. If necessary, adjust the rubber stops by rotating them so that the cover is properly closed. For this circle the top chalk stops, close the cover and reprint chalk check whether the adjacent rubber stoppers.